• CRBH3510A cross roller bearing
  • CRBH3510A bearing structure
  • Part NO.

    Open type:CRBH3510A

    With seal:CRBH3510AUU

  • Dimension




  • Mounting

  • Basic Load Ratings



  • Equivalent Model

  • Features
  • Mounting
  • CRBH3510A detail specifications:

    Type of guide Roller
    Space retainer Yes
    Material GCr15
    Standard lubrication method Grease lubrication
    Oil hole Yes
    Sealing Oil seal at both sides
    Radial clearance T1, C1, C2
    Rotation accuracy P5/P4
    Working temperature -20℃ ~ 80℃


    CRBH3510A cross roller bearing features:

    1. Integrated inner ring and outer ring, provide high stiffness.

    2. Sustain radial, axial and moment loads at the same time.

    3. High rigidity & rotation accuracy, compact structure reduce the influence by installation.

    4. Thin-section, space saving and reduce the overall weight of the device.


    CRBH crossed roller bearing catalog – BRS Bearing



  • CRBH3510A cross roller bearing installation instructions

    Cautions: For crossed roller bearings, when the rigidity of the mounting parts is not sufficient, stress concentration will occur at the contact area between the rollers and raceways, and the bearing performance will be deteriorated significantly.

    CRBH cross roller bearing installation

    Therefore, it is necessary to carefully examine the rigidity of housing and the strength of fixing bolts when a large moment will be applied.


    1. Before installation, please clean bearing bracket, shaft, or other components, make sure there is no burrs or rough edge.
    2. Fix the inner and outer rings in the axial direction by using fixing plates, etc.


We will reply to your message within 24 hours