Products
VLA200414-N
2019-03-21
  • VLA200414-N light series four point contact bearings
  • VLA200414-N slewing bearing structure
  • Part NO.

    Open type:VLA200414-N

  • Dimension

    di:304mm

    Da:503.3mm

    H:56mm

  • Mounting

    Li:332mm

    La:455mm

  • Basic Load Ratings

    Cr:111kN

    Cor:110kN

    Ca:169kN

    Coa:295kN

  • Gear Teeth

    m:5mm

    z:99mm

  • Equivalent Model

Mass:29.5kg
  • Features
  • Mounting
  • VLA200414-N detail specifications:

    Rolling Elements Ball
    Space retainer Yes
    Material GCr15 Bearing steel / 50Mn
    Standard lubrication method Grease lubrication
    Lubrication hole Yes
    Sealing NBR sealing at both sides
    Raceway Hardness HRC 55 ~ 60
    Working temperature -20℃ ~ 40℃

     

    VLA200414-N light series four point contact bearings features:

    1. Support axial, radial and tilting moment loads.

    2. Normal clearance, suitable for light to medium-duty arrangements which require lower accuracy.

    3. Easy installation, with mounting holes on both inner and outer ring.

    4. Light weight and thin section.

     

     

  • VLA200414-N light series four point contact bearings installation instructions

     

    VLU200414 slewing ring mounting instruction

    1. Make sure the mounting surface is flat and clean, and free from burrs or

    rough edge.

     

    2. The unhardened zone is marked with an “S” on the slewing ring, it must be positioned outside the main load-carrying areas.

     

    3. Commissioning of the slewing ring under sufficient load.

    slewing ring bolts fastening order

     

    4. Adjust the backlash of gear and recheck it after final tightening of the bearing.

     

    5. Fastening bolts. Place the bearing onto connecting structure and align the screw holes. Screw all the bolts in the holes first and follow the order as shown in diagram when tightening bolts in diagonally opposite sequence. Do not tighten bolts randomly.

     

    6. Check the installation by rotating the assembled bearing arrangement. The torque should not show any excessive variation or “tight spots” during rotation.

     

     

     

LEAVE MESSAGE

We will reply to your message within 24 hours