Products
VSU200844
2019-11-22
  • VSU200844 slewing bearing
  • ina VSU200844 bearing
  • vsu200844 slewing ring made in china
  • VSU200844 turntable bearing structure
  • Part NO.

    Open type:VSU200844

  • Dimension

    di:772mm

    Da:916mm

    H:56mm

  • Mounting

    Li:798mm

    La:890mm

  • Basic Load Ratings

    Cr:145kN

    Cor:510kN

  • Gear Teeth

    m:-mm

    z:-mm

  • Equivalent Model

Mass:60kg
  • Features
  • Mounting
  • VSU200844 bearing detail specifications:

    Rolling Elements Ball
    Space retainer Yes
    Material 50Mn
    Standard lubrication method Grease lubrication
    Lubrication hole Yes
    Sealing NBR sealing at both sides
    Radial clearance 0 ~ 0.3mm
    Working temperature -20℃ ~ 40℃

     

    VSU200844 bearing features:

    1. Can support axial, radial and tilting moment loads at the same time.

    2. Compact structure and light weight.

    3. Easy installation, with through holes or threaded holes for fixing screws.

    4. Professional Surface treatment such as blackening, galvanization(zinc-plating,zinc coating), antisepticize, corrosion prevention, rotproof, antiseptic, anticorrosive painting, etc. Ensure BRS Bearings function well under extreme working conditions.

  • VSU200844 slewing ring bearing installation instructions

     

    VLU200414 slewing ring mounting instruction

    1. Make sure the mounting surface is flat and clean, and free from burrs or

    rough edge.

     

    2. The unhardened zone is marked with an “S” on the slewing ring, it must be positioned outside the main load-carrying areas.

     

    3. Commissioning of the slewing ring under sufficient load.

    slewing ring bolts fastening order

     

    4. Adjust the backlash of gear and recheck it after final tightening of the bearing.

     

    5. Fastening bolts. Place the bearing onto connecting structure and align the screw holes. Screw all the bolts in the holes first and follow the order as shown in diagram when tightening bolts in diagonally opposite sequence. Do not tighten bolts randomly.

     

    6. Check the installation by rotating the assembled bearing arrangement. The torque should not show any excessive variation or “tight spots” during rotation.

     

     

     

LEAVE MESSAGE

We will reply to your message within 24 hours