VSI200844-N detail specifications:

VSI200844-N slewing bearing features:

1. Can support axial, radial and tilting moment loads at the same time.

2. Compact structure and light weight.

3. Easy installation, with through holes or threaded holes for fixing screws.

4. Professional Surface treatment such as blackening, galvanization(zinc-plating,zinc coating), antisepticize, corrosion prevention, rotproof, antiseptic, anticorrosive painting, etc. Ensure BRS Bearings function well under extreme working conditions.

VSI200844-N four point contact bearing installation instructions

1. Make sure the mounting surface is flat and clean, and free from burrs or

rough edge.

2. The unhardened zone is marked with an “S” on the slewing ring, it must be positioned outside the main load-carrying areas.

3. Commissioning of the slewing ring under sufficient load.

4. Adjust the backlash of gear and recheck it after final tightening of the bearing.

5. Fastening bolts. Place the bearing onto connecting structure and align the screw holes. Screw all the bolts in the holes first and follow the order as shown in diagram when tightening bolts in diagonally opposite sequence. Do not tighten bolts randomly.

6. Check the installation by rotating the assembled bearing arrangement. The torque should not show any excessive variation or “tight spots” during rotation.