XSU080168 crossed roller bearing specifications:

More XSU series cross roller bearing models

XSU080168 cross roller bearing features:

1. Thin section crossed roller bearing with integrated inner and outer ring.

2. Support high radial loads, moderate axial loads and tilting moment loads.

3. High rigidity & running accuracy.

4. Easy installation, bearings can be screw mounted directly to the adjacent construction.

FAQ

1. What is the MOQ for this model XSU080168?
There is no MOQ for bearing models in stock, and low MOQ for custom design. Please contact us for details.

2. Can I order XSU080168 bearing with higher precision grade?

Yes, the standard type XSU080168 cross roller ring axial/radial runout of inner and outer ring is below 0.01mm, but we can produce higher precision level too. Please contact us with your detailed requirements.

3. How to lubricate XSU080168 cross roller bearings?
Unless otherwise stated, all BRS made XSU series crossed roller bearings are filled with proper amount of complex lithium grease before delivery. So users can directly put bearings into application after receiving goods. Then after 1~6 months operation, bearings should be added with proper grease based on working conditions.

XSU080168 crossed roller bearing installation instructions

XSU080168 bearing mounting size:

Inner ring Li: 145mm

Mounting hole: 12-φ6.8, counter bore hole φ11 depth 6.8, equally spaced

Outer ring La: 190mm

Mounting hole: 12-φ6.8, counter bore hole φ11 depth 6.8, equally spaced

1.Before installation, please clean bearing bracket, shaft, or other components, make sure there is no burrs or rough edge.

2.Fix the inner and outer rings in the axial direction directly to the mounting surface by fixing bolts.

3. If large number of radial load and/or moment is applied, it is recommended to prepare flange part as Fig.4.